Heart Pendants

My project is to print roughly ~100 of these 3d hearts in various colors and potentially sizes. My friend has the Bambu Labs H2D so I've already done several runs to iron out of the kinks. Project details: - File attached (currently 40mm wide) - It seems to print best at a 45 deg angle. If printed flat the stepping on the face of the heart doesn't look good. I care about the "Naked Heart" text so I'd rather that be on the upper side and not the support side. And the face that is currently up should still face up, but at 45 deg. - I want to try using PETG for the interface so that the supports don't tear into the hearts. - I've mostly been doing silk PLA which I like and want to continue with. I want to continue with that. Experiment with some single color (lilac, light blue). And also multi-color. - I want to print about ~100. But let's do smaller batches so we can also refine settings and make sure output is good. ...

August 25, 2026